RV200 with Post-Installed Rebar (CFS+) - Rawlplug United Kingdom

High performance vinylester resin approved for use with post-installed rebar connections - Cartridge Free System (CFS+)

Approved for use with post-installed rebars in non-cracked concrete
Suitable for use in low temperatures (down to -20°C for winter option) enables use throughout the year
Suitable for use in dry or wet substrates and water filled holes
Anchor does not generate tensions in the substrate which enables RV200 to be specified where closer edge and spacing distances are required
Unique soft foil pack for less waste
Effortless extrusion due to patented self-opening system with manual or battery dispenser guns
Very high load capacity
Rapid bonding time enables quick execution of works
Winter version can be used in warmer temperatures for faster curing
Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Product Code	Resin	Description / Resin Type	Volume
Product Code	Resin	Description / Resin Type	[ml]
R-CFS+RV200-600-8	RV200	Styrene Free Vinylester Resin	600
R-CFS+RV200-4	RV200	Styrene Free Vinylester Resin	300

Drill hole to the required diameter and depth for rebar size being used.
Clean the hole thoroughly with brush and hand pump at least four times before installation.
Insert foil into gun and attach nozzle.
Dispense to waste until even colour is obtained.
Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
Immediately insert the rebar, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.

POST INSTALLED REBARS

Size			Ø8	Ø10	Ø12	Ø14	Ø16	Ø20	Ø25	Ø28	Ø30	Ø32
Rebar diameter	d_s	[mm]	8	10	12	14	16	20	25	28	30	32
Hole diameter in substrate	d₀	[mm]	12	14	16	18	20	25	30	35	35	40
Brush diameter		[mm]	14	16	20	20	24	28	37	37	37	42
Min. anchorage length	l_{b, min.}	[mm]	115	145	170	200	230	285	355	400	420	455
Min. lap length (overlap splice)	l_{0, min.}	[mm]	200	215	255	300	340	430	540	600	640	690
Max. anchorage length	l_{v, max.}	[mm]	400	500	600	700	800	1000	1000	1000	1000	1000

Minimum working and curing time

RV200

*For wet concrete the curing time must be doubled*For wet concrete the curing time must be doubled

RV200-W

*For wet concrete the curing time must be doubled

Need documents for other product? Visit our Technical Library.

go to library

Something went wrong... Please try again.

Your request will be sent to our sales department. Please note this is not a purchase order.

Associated products