RM50 with Threaded Rods for Masonry (CFS+)

Universal polyester (styrene free) resin - European Approval for 15 substrates - Cartridge Free System (CFS+)

Features and benefits

  • The most contemporary general use bonded anchor
  • Approved for 15 substrates
  • Quick, secure and simple installation
  • Unique soft foil pack for less waste
  • Effortless extrusion due to the patented self-opening system with manual or battery dispenser guns
  • Product with wide spectrum of use in the medium load capacity area
  • Ideal for applications where mechanical anchors are not suitable
  • Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Contact us to get information about product availability and it’s price

Something went wrong... Please try again.

There is no store in the given location.

    Fill in the form with your details and send request for a RM50 with Threaded Rods for Masonry (CFS+)

    Your request will be sent to our sales department. Please note this is not a purchase order.
    See our Privacy and Security Policy. and Terms and Conditions of Product Request.

    Product information

    Product Code

    Resin

    Description / Resin Type

    Volume

    [ml]

    CFS+RM50-4

    RM50

    Styrene Free Polyester Resin

    300

    CFS+RM50S-4

    RM50-S

    High Temperature (Summer) / Slow Cure Styrene Free Polyester Resin

    300

    CFS+RM50W-4

    RM50-W

    Low Temperature (Winter) / Rapid Cure Styrene Free Polyester Resin

    300

    R-CFS+RM50-600-8

    RM50

    Styrene Free Polyester Resin

    600

    R-STUDS

    Size

    Product Code

    Anchor

    Fixture

    Steel class 5.8

    Steel class 8.8

    Steel grade A4

    Diameter

    Length

    Hole diameter

    Max. thickness tfix for: R-STUDS

    Max. thickness tfix for: R-STUDS_MIX

    Max. thickness tfix for: [English]: R-STUDS-OLD

    Max. thickness Solid substrates

    Max. thickness Hollow substrates

    d

    L

    df

    hnom, min

    hnom, max

    hnom, min

    hnom, max

    hnom, min

    hnom, max

    tfix Standard

    tfix Standard

    tfix Maximum

    [mm]

    [mm]

    [mm]

    [mm]

    [mm]

    [mm]

    [mm]

    [mm]

    [mm]

    [mm]

    [mm]

    [mm]

    M8

    R-STUDS-08110

    R-STUDS-08110-88

    R-STUDS-08110-A4

    8

    110

    9

    40

    -

    40

    -

    40

    -

    20

    50

    20

    R-STUDS-08160

    -

    R-STUDS-08160-A4

    8

    160

    9

    90

    -

    90

    -

    90

    50

    70

    100

    70

    M10

    R-STUDS-10130

    R-STUDS-10130-88

    R-STUDS-10130-A4

    10

    130

    12

    58

    -

    48

    -

    48

    -

    33

    33

    -

    R-STUDS-10170

    -

    R-STUDS-10170-A4

    10

    170

    12

    98

    -

    88

    -

    88

    38

    73

    73

    33

    R-STUDS-10190

    -

    R-STUDS-10190-A4

    10

    190

    12

    118

    -

    108

    -

    108

    58

    93

    93

    53

    M12

    R-STUDS-12160

    R-STUDS-12160-88

    R-STUDS-12160-A4

    12

    160

    14

    85

    -

    65

    -

    65

    -

    50

    60

    20

    R-STUDS-12190

    -

    R-STUDS-12190-A4

    12

    190

    14

    115

    -

    95

    -

    95

    30

    80

    90

    50

    R-STUDS-12220

    -

    R-STUDS-12220-A4

    12

    220

    14

    145

    -

    125

    -

    125

    60

    110

    120

    80

    R-STUDS-12260

    -

    R-STUDS-12260-A4

    12

    260

    14

    185

    -

    165

    -

    165

    100

    150

    160

    120

    R-STUDS-12300

    -

    R-STUDS-12300-A4

    12

    300

    14

    225

    45

    205

    45

    205

    140

    190

    200

    160

    M16

    R-STUDS-16190

    R-STUDS-16190-88

    R-STUDS-16190-A4

    16

    190

    18

    111

    -

    71

    -

    71

    -

    66

    86

    -

    R-STUDS-16220

    -

    R-STUDS-16220-A4

    16

    220

    18

    141

    -

    101

    -

    101

    11

    96

    116

    -

    R-STUDS-16260

    -

    R-STUDS-16260-A4

    16

    260

    18

    181

    -

    141

    -

    141

    51

    136

    156

    -

    R-STUDS-16300

    -

    R-STUDS-16300-A4

    16

    300

    18

    221

    -

    181

    -

    181

    91

    176

    196

    -

    R-STUDS-16380

    -

    R-STUDS-16380-A4

    16

    380

    18

    301

    41

    261

    41

    261

    171

    256

    276

    -

    Base material

    • Solid Concrete Block

      Solid Concrete Block

    • Lightweight Concrete Block

      Lightweight Concrete Block

    • Solid Brick

      Solid Brick

    • Concrete Slab

      Concrete Slab

    • Solid Sand-lime Brick

      Solid Sand-lime Brick

    • Aerated Concrete Block

      Aerated Concrete Block

    • Hollow Sand-lime Brick

      Hollow Sand-lime Brick

    • Hollow Brick

      Hollow Brick

    • Hollow Lightweight Concrete Block

      Hollow Lightweight Concrete Block

    Applications

    • Balustrading
    • Handrails
    • Canopies
    • Curtain walling
    • Bathroom fittings
    • Cable trays
    • Barriers
    • Cladding restraint
    • Fencing & gates manufacturing and installation
    • Pipework installation

    Installation guide

    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    1. Drill hole to the required diameter and depth for stud size being used.
    2. Insert foil into gun and attach nozzle.
    3. Solid substrates: Clean the drill hole thoroughly with brush and hand pump at least four times before installation.
    4. Insert mesh sleeve into the hole with required depth and diameter
    5. Dispense to waste until even colour is obtained.
    6. Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 100% of its depth.
    7. Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
    8. Attach fixture and tighten the nut to the required installation torque

    Installation data

    AERATED CONCRETE

    Size

    M8

    M10

    M12

    M16

    Thread diameter

    d

    [mm]

    8

    10

    12

    16

    Hole diameter in substrate

    d0

    [mm]

    10

    12

    14

    18

    Installation torque

    Tinst

    [Nm]

    3

    4

    6

    10

    Min. hole depth in substrate

    h0

    [mm]

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    Min. installation depth

    hnom

    [mm]

    80

    85

    95

    105

    Min. spacing

    smin

    [mm]

    50

    50

    50

    54

    Min. edge distance

    cmin

    [mm]

    50

    50

    50

    54

    CERAMIC SOLID SUBSTRATES

    Size

    M8

    M10

    M12

    M16

    Thread diameter

    d

    [mm]

    8

    10

    12

    16

    Hole diameter in substrate

    d0

    [mm]

    10

    12

    14

    18

    Installation torque

    Tinst

    [Nm]

    5

    8

    10

    15

    Min. hole depth in substrate

    h0

    [mm]

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    Min. installation depth

    hnom

    [mm]

    80

    85

    95

    105

    Min. spacing

    smin

    [mm]

    50

    50

    50

    54

    Min. edge distance

    cmin

    [mm]

    50

    50

    50

    54

    HOLLOW SUBSTRATES

    Size

    M8

    M10

    M12

    M16

    Plastic mesh sleeve size

    dxl

    [mm]

    12x50

    12x80

    16x85

    16x130

    16x85

    16x130

    20x85

    Thread diameter

    d

    [mm]

    8

    8

    10

    10

    12

    12

    16

    Hole diameter in substrate

    d0

    [mm]

    12

    12

    16

    16

    16

    16

    20

    Installation torque

    Tinst

    [Nm]

    3

    3

    4

    4

    6

    6

    10

    Min. hole depth in substrate

    h0

    [mm]

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    Min. installation depth

    hnom

    [mm]

    50

    80

    85

    125

    85

    125

    85

    Min. spacing

    smin

    [mm]

    100

    100

    100

    100

    100

    100

    120

    Min. edge distance

    cmin

    [mm]

    100

    100

    100

    100

    100

    100

    120

    Minimum working and curing time

    RM50

    Resin temperature

    Concrete temperature

    Curing time*

    Working time

    [°C]

    [°C]

    [min]

    [min]

    5

    -20

    -

    -

    5

    -15

    -

    -

    5

    -10

    -

    -

    5

    -5

    8 h

    70

    5

    0

    4 h

    45

    5

    5

    2 h

    25

    10

    10

    1.5 h

    15

    15

    15

    1 h

    9

    20

    20

    45

    5

    25

    30

    30

    2

    25

    35

    -

    -

    25

    40

    -

    -

    RM50-S

    Resin temperature

    Concrete temperature

    Curing time*

    Working time

    [°C]

    [°C]

    [min]

    [min]

    5

    -20

    -

    -

    5

    -15

    -

    -

    5

    -10

    -

    -

    5

    -5

    24 h

    180

    5

    0

    18 h

    120

    5

    5

    12 h

    60

    10

    10

    8 h

    45

    15

    15

    6 h

    25

    20

    20

    4 h

    15

    25

    30

    1.5 h

    7

    25

    35

    1 h

    6

    25

    40

    45

    5

    *For wet concrete the curing time must be doubled

    RM50-W

    Resin temperature

    Concrete temperature

    Curing time*

    Working time

    [°C]

    [°C]

    [min]

    [min]

    5

    -20

    24 h

    45

    5

    -15

    18 h

    30

    5

    -10

    8 h

    20

    5

    -5

    5 h

    11

    5

    0

    2 h

    7

    5

    5

    1 h

    5

    10

    10

    45

    2

    15

    15

    30

    1.5

    20

    20

    15

    1

    25

    30

    -

    -

    25

    35

    -

    -

    25

    40

    -

    -

    *For wet concrete the curing time must be doubled

    Downloads

    Need documents for other product? Visit our Technical Library.

    go to library

    Associated products

    • RT-SDSB Drill bits Brickdrill SDS plus

      RT-SDSB Drill bits Brickdrill SDS plus

    • R-GUN Dispenser Gun CFS+

      R-GUN Dispenser Gun CFS+

    • R-GUN Pneumatic Dispenser Gun CFS+

      R-GUN Pneumatic Dispenser Gun CFS+

    Go to top