R-STUDS Metric Threaded Rods - Steel Class 8.8, Flat Head

Threaded rod made of carbon steel class 8.8 for use with bonded anchors

Threaded rod made of carbon steel class 8.8 is suitable for outdoor use and in damp conditions
Possibility of removal when used with internally threaded socket
Can be post-installed through fixture in some cases. (Consult technical advisory service)
No screwdriver needed for installation

Something went wrong... Please try again.

Your request will be sent to our sales department. Please note this is not a purchase order.

Drill hole to the required diameter and depth for stud size being used.
Clean the hole thoroughly with hand pump and hole brush
If required, insert the mesh sleeve into position
Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product)
Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached
Leave undisturbed until curing time of resin has elapsed
Attach fixture and tighten the nut to the required installation torque

Need documents for other product? Visit our Technical Library.

go to library

Associated products