R-SL-TK-EN High Temperature Silicone

High-temperature silicone – One-component elastic sealant with acetate curing system.

Features and benefits

  • The seal possesses complete and long-term resistance to oils, petrol, grease, diesel & coolants.
  • Resistant to changeable weather conditions, temperature extremes (periodically up to 350°C) and UV radiation.
  • Highly and permanently elastic sealing properties

Contact us to get information about product availability and its price

Something went wrong... Please try again.

There is no store in the given location.

    Fill in the form with your details and send request for a R-SL-TK-EN High Temperature Silicone

    Your request will be sent to our sales department. Please note this is not a purchase order.
    See our Privacy and Security Policy. and Terms and Conditions of Product Request.

    Base material

    • Glass

      Glass

    • Protected metals  (aluminium, brass, copper,  steel, zinc-plated metal sheet)

      Protected metals  (aluminium, brass, copper,  steel, zinc-plated metal sheet)

    • Ceramics

      Ceramics

    • Glaze

      Glaze

    • Concrete

      Concrete

    • Masonry

      Masonry

    • Plastics

    • Metal Sheet & Profiles

      Metal Sheet & Profiles

    For use also with

    • Terracotta

      Terracotta

    • PVC Profile

      PVC Profile

    • High-Density Natural Stone

      High-Density Natural Stone

    • Metal Sheet & Profiles

      Metal Sheet & Profiles

    • Stainless Steel

      Stainless Steel

    • Solid Brick

      Solid Brick

    • Hollow Brick

      Hollow Brick

    • Solid Sand-lime Brick

      Solid Sand-lime Brick

    Applications

    • Sealing in high-temperature environments: furnaces, chimneys, heating installations, combustion & fuel ducts, ventilation and air-conditioning systems.
    • Fixing of elements in domestic fireplaces and industrial furnaces.

    Installation guide

    Installation guide
    Installation guide
    Installation guide
    1. The surface, that silicone will be apllied on, should be clean, free of dust, grease, rust, remains of old seal and other substances that might weaken the cohesion.
    2. Prior to application of silicone protect edges with masking tape
    3. Cut the tip of the cartridge, leaving part of the thread. Screw the applicator on to the thread, then cut at the required angle to give an aperture width suited to the joint.
    4. Use manual or pneumatic gun applicator.
    5. Applied silicone may be smoothed with a spatula or similar tool. Moisten the spatula first in special wetting agent or detergent solution.
    6. The silicone hardens by reaction with moisture from the air, so ensure well-ventilated conditions.
    7. After completing the application, wipe tools with a paper towel and clean with solvent.

    Downloads

    Need documents for other product? Visit our Technical Library.

    go to library
    Go to top