R-SL-NEU-EN Neutral Silicone

Neutral silicone – one-component elastic sealant with neutral curing system.

Features and benefits

  • Highly and permanently elastic sealing properties
  • Very good adhesion to most building materials.
  • Durable seal (completely resistant to weathering and UV radiation)

Contact us to get information about product availability and its price

Something went wrong... Please try again.

There is no store in the given location.

    Fill in the form with your details and send request for a R-SL-NEU-EN Neutral Silicone

    Your request will be sent to our sales department. Please note this is not a purchase order.
    See our Privacy and Security Policy. and Terms and Conditions of Product Request.

    Base material

    • Glass

      Glass

    • Metal Sheet & Profiles

      Metal Sheet & Profiles

    • Stainless Steel

      Stainless Steel

    • Glaze

      Glaze

    • Masonry

      Masonry

    • Concrete

      Concrete

    • Aerated Concrete Block

      Aerated Concrete Block

    For use also with

    • Solid Concrete Block

      Solid Concrete Block

    • Hollow-core Slab

      Hollow-core Slab

    • Concrete Slab

      Concrete Slab

    • Lightweight Concrete Block

      Lightweight Concrete Block

    • Hollow Lightweight Concrete Block

      Hollow Lightweight Concrete Block

    • Silicate Blocks

      Silicate Blocks

    • High-Density Natural Stone

      High-Density Natural Stone

    • Hollow Brick

      Hollow Brick

    • Vertically-perforated Clay Block

      Vertically-perforated Clay Block

    • Hollow Sand-lime Brick

      Hollow Sand-lime Brick

    • Solid Brick

      Solid Brick

    • Solid Sand-lime Brick

      Solid Sand-lime Brick

    • Ceramic Hollow Block

      Ceramic Hollow Block

    • Gypsum Fibreboards

      Gypsum Fibreboards

    • Plasterboard

      Plasterboard

    • Chipboard

      Chipboard

    • Oriented Strand Board

      Oriented Strand Board

    • PVC Profile

      PVC Profile

    Applications

    • Filling elastic expansion joints
    • Filling joints behind window and door frames
    • Sealing of prefabricated elements in construction
    • Sealing of metal coolers, containers and tanks
    • Connections between galvanized steel, brass and other metals

    Installation guide

    Installation guide
    Installation guide
    Installation guide
    1. The surface, that silicone will be apllied on, should be clean, free of dust, grease, rust, remains of old seal and other substances that might weaken the cohesion.
    2. Prior to application of silicone protect edges with masking tape
    3. Cut the tip of the cartridge, leaving part of the thread. Screw the applicator on to the thread, then cut at the required angle to give an aperture width suited to the joint.
    4. Use manual or pneumatic gun applicator.
    5. Applied silicone may be smoothed with a spatula or similar tool. Moisten the spatula first in special wetting agent or detergent solution.
    6. The silicone hardens by reaction with moisture from the air, so ensure well-ventilated conditions.
    7. After completing the application, wipe tools with a paper towel and clean with solvent.

    Downloads

    Need documents for other product? Visit our Technical Library.

    go to library
    Go to top