Something went wrong... Please try again.
R-KF2 with Threaded Rods
Economical polyester resin approved for use in non-cracked concrete
Features and benefits
- Economical resin for medium duty load applications
- Can be used in damp condition and underwater applications
- Wide range of steel studs with different lengths and diameters
- Small edge and space distances
- Suitable for repetitive use. Partly used product can be reused by fitting a new mixing nozzle
Product information
Product Code |
Resin |
Description / Resin Type |
Volume |
[ml] | |||
R-KF2-300 |
R-KF2 |
Polyester Resin |
300 |
R-KF2-380 |
R-KF2 |
Polyester Resin |
380 |
KEM-PSC-300-KOE-EN |
Polyester resin |
Polyester Resin |
300 |
Base material
-
Non-cracked concrete C20/25-C50/60
Applications
- Guard rails
- Handrails
- Canopies
- Masonry support
- Balustrading
- Cable trays
- Curtain walling
- Fencing & gates manufacturing and installation
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Clean the hole thoroughly with brush and hand pump at least four times before installation.
- Insert cartridge into gun and attach nozzle.
- Dispense to waste until even colour is obtained.
- Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
- Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
- Attach fixture and tighten the nut to the required torque.
Installation data
R-STUDS
Size |
M8 |
M10 |
M12 |
M16 |
M20 |
M24 |
M30 |
||
Thread diameter |
d |
[mm] |
8 |
10 |
12 |
16 |
20 |
24 |
30 |
Hole diameter in substrate |
d0 |
[mm] |
10 |
12 |
14 |
18 |
24 |
28 |
35 |
Hole diameter in fixture |
df |
[mm] |
9 |
12 |
14 |
18 |
22 |
26 |
32 |
Min. hole depth in substrate |
h0 |
[mm] |
hnom + 5 |
hnom + 5 |
hnom + 5 |
hnom + 5 |
hnom + 5 |
hnom + 5 |
hnom + 5 |
Min. substrate thickness |
hmin |
[mm] |
hnom + 30 ≥ 100 |
hnom + 30 ≥ 100 |
hnom + 30 ≥ 100 |
hnom + 30 ≥ 100 |
hnom + 2d0 |
hnom + 2d0 |
hnom + 2d0 |
Installation torque |
Tinst |
[Nm] |
10 |
20 |
40 |
80 |
120 |
180 |
300 |
Min. spacing |
smin |
[mm] |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
Min. edge distance |
cmin |
[mm] |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
MINIMUM EMBEDMENT DEPTH | |||||||||
Min. installation depth |
hnom,min |
[mm] |
60 |
70 |
80 |
100 |
120 |
140 |
165 |
MAXIMUM EMBEDMENT DEPTH | |||||||||
Min. installation depth |
hnom, max |
[mm] |
100 |
120 |
145 |
190 |
240 |
290 |
360 |
Minimum working and curing time
Resin temperature |
Concrete temperature |
Curing time* |
Working time |
[°C] |
[°C] |
[min] |
[min] |
5 |
-5 |
360 |
60 |
5 |
0 |
180 |
40 |
5 |
5 |
120 |
20 |
10 |
10 |
80 |
12 |
15 |
15 |
60 |
8 |
20 |
20 |
45 |
5 |
25 |
30 |
20 |
2 |
Downloads
- R-KF2 with Threaded Rods - Technical Data Sheet
- 1488-CPD-0262_W RP30-R-KF2 ETA-11-0141 EN.pdf
- ETAS 11_0141 RP30 R-KF2 EN.pdf
- UKTA-0836-22_6102_2022_KF2_EN.pdf
Need documents for other product? Visit our Technical Library.
go to libraryContact us to get information about product availability and its price
