R-KER with Threaded Rods

High performance vinylester resin approved for use in cracked and non-cracked concrete

Features and benefits

  • Approved for use with threaded rods for use in cracked and non-cracked concrete (EAD 330499-00-0601)
  • Suitable for use in low temperatures (down to -20°C for winter option) enables use throughout the year
  • Winter version can be used in warmer temperatures for faster curing
  • Suitable for use in dry or wet substrates and water filled holes
  • Rapid bonding time enables quick execution of works
  • Very high load capacity
  • Anchor does not generate tensions in the substrate which enables R-KER to be specified where closer edge and spacing distances are required
  • Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Contact us to get information about product availability and it’s price

Something went wrong... Please try again.

There is no store in the given location.

    Fill in the form with your details and send request for a R-KER with Threaded Rods

    Your request will be sent to our sales department. Please note this is not a purchase order.
    See our Privacy and Security Policy. and Terms and Conditions of Product Request.

    Product information

    Product Code

    Resin

    Description / Resin Type

    Volume

    [ml]

    R-KER-300

    R-KER

    Styrene Free Vinylester Resin

    300

    R-KER-345

    R-KER

    Styrene Free Vinylester Resin

    345

    R-KER-380

    R-KER

    Styrene Free Vinylester Resin

    380

    R-KER-400

    R-KER

    Styrene Free Vinylester Resin

    400

    R-KER-300-W

    R-KER-W

    Low Temperature (Winter) / Rapid Cure Styrene Free Vinylester Resin

    300

    R-KER-380-W

    R-KER-W

    Low Temperature (Winter) / Rapid Cure Styrene Free Vinylester Resin

    380

    R-KER-400-W

    R-KER-W

    Low Temperature (Winter) / Rapid Cure Styrene Free Vinylester Resin

    400

    R-KER-380-S

    R-KER-S

    High Temperature (Summer) / Slow Cure Styrene Free Vinylester Resin

    380

    R-KER-400-S

    R-KER-S

    High Temperature (Summer) / Slow Cure Styrene Free Vinylester Resin

    400

    R-STUDS

    Size

    Product Code

    Anchor

    Fixture

    Steel class 5.8

    Steel class 8.8

    Steel grade A4

    Diameter

    Length

    Hole diameter

    Max. thickness tfix for:

    d

    L

    df

    hnom, min

    hnom, max

    [mm]

    [mm]

    [mm]

    [mm]

    [mm]

    M8

    R-STUDS-08110

    R-STUDS-08110-88

    R-STUDS-08110-A4

    8

    110

    9

    40

    -

    R-STUDS-08160

    -

    R-STUDS-08160-A4

    8

    160

    9

    90

    50

    M10

    R-STUDS-10130

    R-STUDS-10130-88

    R-STUDS-10130-A4

    10

    130

    12

    48

    -

    R-STUDS-10170

    -

    R-STUDS-10170-A4

    10

    170

    12

    88

    38

    R-STUDS-10190

    -

    R-STUDS-10190-A4

    10

    190

    12

    108

    58

    M12

    R-STUDS-12160

    R-STUDS-12160-88

    R-STUDS-12160-A4

    12

    160

    14

    65

    -

    R-STUDS-12190

    -

    R-STUDS-12190-A4

    12

    190

    14

    95

    30

    R-STUDS-12220

    -

    R-STUDS-12220-A4

    12

    220

    14

    125

    60

    R-STUDS-12260

    -

    R-STUDS-12260-A4

    12

    260

    14

    165

    100

    R-STUDS-12300

    -

    R-STUDS-12300-A4

    12

    300

    14

    205

    140

    M16

    R-STUDS-16190

    R-STUDS-16190-88

    R-STUDS-16190-A4

    16

    190

    18

    71

    -

    R-STUDS-16220

    R-STUDS-16220-88

    R-STUDS-16220-A4

    16

    220

    18

    101

    11

    R-STUDS-16260

    -

    R-STUDS-16260-A4

    16

    260

    18

    141

    51

    R-STUDS-16300

    -

    R-STUDS-16300-A4

    16

    300

    18

    181

    91

    R-STUDS-16380

    -

    R-STUDS-16380-A4

    16

    380

    18

    261

    171

    M20

    R-STUDS-20260

    R-STUDS-20260-88

    R-STUDS-20260-A4

    20

    260

    22

    117

    -

    R-STUDS-20300

    -

    R-STUDS-20300-A4

    20

    300

    22

    157

    37

    R-STUDS-20350

    -

    R-STUDS-20350-A4

    20

    350

    22

    207

    87

    M24

    R-STUDS-24300

    R-STUDS-24300-88

    R-STUDS-24300-A4

    24

    300

    26

    132

    -

    M30

    R-STUDS-30380

    R-STUDS-30380-88

    R-STUDS-30380-A4

    30

    380

    32

    180

    -

    Base material

    • Cracked concrete C20/25-C50/60

      Cracked concrete C20/25-C50/60

    • Non-cracked concrete C20/25-C50/60

      Non-cracked concrete C20/25-C50/60

    Applications

    • Curtain walling
    • Balustrading
    • Handrails
    • Canopies
    • Large panel reinforcing system - Copy Eco
    • Cable conduits and trays
    • Fencing & gates manufacturing and installation
    • Pipework/ductwork supports
    • Platforms
    • Pipelines systems
    • Passenger lifts

    Installation guide

    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    Installation guide
    1. Drill hole to the required diameter and depth for stud size being used.
    2. Clean the hole thoroughly with brush and hand pump at least four times before installation.
    3. Insert cartridge into gun and attach nozzle.
    4. Dispense to waste until even colour is obtained.
    5. Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
    6. Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
    7. Attach fixture and tighten the nut to the required torque.

    Installation data

    R-STUDS

    Size

    M8

    M10

    M12

    M16

    M20

    M24

    M30

    Thread diameter

    d

    [mm]

    8

    10

    12

    16

    20

    24

    30

    Hole diameter in substrate

    d0

    [mm]

    10

    12

    14

    18

    24

    28

    35

    Hole diameter in fixture

    df

    [mm]

    9

    12

    14

    18

    22

    26

    32

    Min. hole depth in substrate

    h0

    [mm]

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    hnom + 5

    Min. substrate thickness

    hmin

    [mm]

    hnom + 30 ≥ 100

    hnom + 30 ≥ 100

    hnom + 30 ≥ 100

    hnom + 30 ≥ 100

    hnom + 2d0

    hnom + 2d0

    hnom + 2d0

    Installation torque

    Tinst

    [Nm]

    10

    20

    40

    80

    120

    180

    300

    Min. spacing

    smin

    [mm]

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    Min. edge distance

    cmin

    [mm]

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    0.5 * hnom ≥ 40

    MINIMUM EMBEDMENT DEPTH

    Min. installation depth

    hnom, min

    [mm]

    60

    70

    80

    100

    120

    140

    165

    MAXIMUM EMBEDMENT DEPTH

    Min. installation depth

    hnom, max

    [mm]

    100

    120

    145

    190

    240

    290

    360

    Minimum working and curing time

    R-KER

    Resin temperature

    Concrete temperature

    Curing time*

    Working time

    [°C]

    [°C]

    [min]

    [min]

    5

    -20

    -

    -

    5

    -15

    -

    -

    5

    -10

    -

    -

    5

    -5

    6 h

    60

    5

    0

    3 h

    40

    5

    5

    2 h

    20

    10

    10

    80

    12

    15

    15

    60

    8

    20

    20

    45

    5

    25

    25

    30

    3

    25

    30

    20

    2

    25

    40

    10

    0.5

    25

    45

    -

    -

    25

    50

    -

    -

    *For wet concrete the curing time must be doubled

    R-KER-W

    Resin temperature

    Concrete temperature

    Curing time*

    Working time

    [°C]

    [°C]

    [min]

    [min]

    5

    -20

    24 h

    100

    5

    -15

    16 h

    60

    5

    -10

    8 h

    30

    5

    -5

    4 h

    16

    5

    0

    2 h

    12

    5

    5

    1 h

    8

    10

    10

    45

    5

    15

    15

    30

    3

    20

    20

    10

    2

    25

    25

    -

    -

    25

    30

    -

    -

    25

    40

    -

    -

    25

    45

    -

    -

    25

    50

    -

    -

    *For wet concrete the curing time must be doubled

    R-KER-S

    Resin temperature

    Concrete temperature

    Curing time*

    Working time

    [°C]

    [°C]

    [min]

    [min]

    5

    -20

    -

    -

    5

    -15

    -

    -

    5

    -10

    -

    -

    5

    -5

    24 h

    65

    5

    0

    16 h

    50

    5

    5

    12 h

    35

    10

    10

    8 h

    20

    15

    15

    6 h

    12

    20

    20

    4 h

    9

    25

    25

    3 h

    7

    25

    30

    2 h

    6

    25

    40

    45

    4

    25

    45

    35

    3

    25

    50

    25

    2

    *For wet concrete the curing time must be doubled

    Associated products

    • RT-SDSR Drill bits Rebardrill SDS plus

      RT-SDSR Drill bits Rebardrill SDS plus

    • R-STUDS Metric Threaded Rods - Steel Class 8.8

      R-STUDS Metric Threaded Rods - Steel Class 8.8

    • R-STUDS Metric Threaded Rods - Hot Dip Galvanized

      R-STUDS Metric Threaded Rods - Hot Dip Galvanized

    • RT-MAXA Drill bits Aggressor SDS max

      RT-MAXA Drill bits Aggressor SDS max

    • Wire Mesh Sleeves

      Wire Mesh Sleeves

    • R-BLOWPUMP Blow Pump

      R-BLOWPUMP Blow Pump

    • R-BRUSH Manual Wire Brushes

      R-BRUSH Manual Wire Brushes

    • R-GUN Dispenser Gun 175 - 310 ml

      R-GUN Dispenser Gun 175 - 310 ml

    • R-GUN Manual dispenser for bonded anchor resin in cartridges 380-410 ml

      R-GUN Manual dispenser for bonded anchor resin in cartridges 380-410 ml

    • R-GUN Pneumatic Dispenser Gun 380ml

      R-GUN Pneumatic Dispenser Gun 380ml

    • R-GUN Battery Dispenser Gun 380 ml

      R-GUN Battery Dispenser Gun 380 ml

    • R-GUN-MULTI Manual dispenser for bonded anchors in cartridges

      R-GUN-MULTI Manual dispenser for bonded anchors in cartridges

    Go to top