Something went wrong... Please try again.
R-DCL Lipped Wedge Anchor
Internally threaded wedge anchor with lip for simple hammer-set installation
Features and benefits
- High performance in cracked and non-cracked concrete confirmed by ETA
- Product is covered with European Technical Assessment for multi-point non-structural fixings
- Product recommended for applications requiring fire resistance
- Internally threaded to be used with threaded stud or bolt
- Easy to install by hammer action and manual setting tool
- Slotted sleeve and internal wedge component together facilitate easy setting and expansion
Contact us to get information about product availability and it’s price
Fill in the form with your details and send request for a R-DCL Lipped Wedge Anchor
Your request will be sent to our sales department. Please note this is not a purchase order.Product information
Size |
Product Code |
Anchor |
Fixture |
|||
Diameter |
External diameter |
Length |
Internal thread length |
Hole diameter |
||
d |
dnom |
L |
lg |
df |
||
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
||
M6 |
R-DCL-06 |
6 |
8 |
25 |
11 |
7 |
M8 |
R-DCL-08-25 |
8 |
10 |
25 |
14 |
9 |
R-DCL-08 |
8 |
10 |
30 |
14 |
9 |
|
M10 |
R-DCL-10-25 |
10 |
12 |
25 |
14 |
12 |
R-DCL-10 |
10 |
12 |
40 |
19 |
12 |
|
M12 |
R-DCL-12-25 |
12 |
15 |
25 |
14 |
14 |
R-DCL-12 |
12 |
15 |
50 |
25 |
14 |
|
M16 |
R-DCL-16 |
16 |
20 |
65 |
28 |
18 |
Base material
-
Cracked concrete C20/25-C50/60
-
Non-cracked concrete C20/25-C50/60
-
Unreinforced concrete
-
Reinforced concrete
Applications
- Pipelines systems
- Ventilation systems
- Sprinkler systems
- Cable conduits and wires
- Gratings
Installation guide
- Drill a hole of required diameter and depth
- Remove debris and thoroughly clean hole with pum
- Insert wedge anchor, slotted end first
- Use the setting tool to drive the internal wedge into the anchor
- Insert bolt or stud through fixture and tighten to the recommended torque
Installation data
Normal concrete
Size |
M6 |
M8/25 |
M8 |
M10/25 |
M10 |
M12/25 |
M12 |
M16 |
||
Thread diameter |
d |
[mm] |
6 |
8 |
8 |
10 |
10 |
12 |
12 |
16 |
Hole diameter in substrate |
d0 |
[mm] |
8 |
10 |
10 |
12 |
12 |
15 |
15 |
20 |
Max. installation torque |
Tinst |
[Nm] |
4.5 |
11 |
11 |
22 |
22 |
38 |
38 |
98 |
Min. hole depth in substrate |
h0 |
[mm] |
27 |
27 |
32 |
27 |
42 |
27 |
52 |
67 |
Min. installation depth |
hnom |
[mm] |
25 |
25 |
30 |
25 |
40 |
25 |
50 |
65 |
Min. substrate thickness |
hmin |
[mm] |
80 |
80 |
80 |
80 |
80 |
80 |
100 |
130 |
Min. spacing |
smin |
[mm] |
200 |
200 |
200 |
200 |
200 |
200 |
200 |
260 |
Min. edge distance |
cmin |
[mm] |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
195 |
Hollow concrete slab
Size |
M6 |
M8/25 |
M8 |
M10/25 |
M10 |
M12/25 |
M12 |
M16 |
||
Thread diameter |
d |
[mm] |
6 |
8 |
8 |
10 |
10 |
12 |
12 |
16 |
Hole diameter in substrate |
d0 |
[mm] |
8 |
10 |
10 |
12 |
12 |
15 |
15 |
20 |
Max. installation torque |
Tinst |
[Nm] |
4.5 |
11 |
11 |
22 |
22 |
38 |
38 |
98 |
Min. hole depth in substrate |
h0 |
[mm] |
27 |
27 |
32 |
27 |
42 |
27 |
52 |
67 |
Min. installation depth |
hnom |
[mm] |
25 |
25 |
30 |
25 |
40 |
25 |
50 |
65 |
Min. substrate thickness |
hmin |
[mm] |
80 |
80 |
80 |
80 |
80 |
80 |
100 |
130 |
Min. spacing |
smin |
[mm] |
200 |
200 |
200 |
200 |
200 |
200 |
200 |
260 |
Min. edge distance |
cmin |
[mm] |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
195 |
