INSULATION FIXINGS - KI 10 TYPE WITH HAMMER-IN NYLON PIN  | |
TYPICAL APPLICATIONS
Fixing light thermal insulation
materials e.g. foamed
polystyrene (Styropor)
rendered facade walls.
| |
MATERIAL
Plug sleeve: impact resistant
co-polymer of polypropylene PP or
polyamide PA 6.0 (Nylon) - to order.
Nail pin: polyamide PA 6.0 (Nylon)
reinforced with fibre glass.
| |
APPROVALS:
TECHNICAL APPROVAL:
ITB no. AT - 15 - 3248/98
+ APPENDIX
INSTALLATION TIPS
- Pre-drilling diameter: 10 mm
-Anchorage depth: min. 50 mm
|
| | PLUG LENGTH (mm) | HOLE DIAMETER (mm) | INSULATION THICKNESS (mm) | QUANTITY
PACK | PRODUCT CODE | | 70 | 10 | 10-20 | 250 | KI-070 | | 90 | 10 | 30-40 | 250 | KI-090 | | 120 | 10 | 60-70 | 250 | KI-120 | | 140 | 10 | 80-90 | 250 | KI-140 | | 160 | 10 | 100-110 | 250 | KI-160 | | 180 | 10 | 120-130 | 250 | KI-180 | | 200 | 10 | 140-150 | 250 | KI-200 | |
Installation | |
|
INSULATION FIXINGS - KI 8 TYPE WITH HAMMER-IN NYLON PIN | |
TYPICAL APPLICATIONS
Fixing light thermal insulation
materials e.g. foamed
polystyrene (Styropor)
rendered facade walls.
| |
MATERIAL
Plug sleeve: impact resistant
co-polymer of polypropylene PP or
polyamide PA 6.0 (Nylon) - to order.
Nail pin: polyamide PA 6.0 (Nylon)
reinforced with fibre glass.
| |
APPROVALS:
TECHNICAL APPROVAL:
ITB no. AT - 15 - 3250/98
+ APPENDIX
INSTALLATION TIPS
Pre-drilling diameter: 8 mm
Anchorage depth: min. 50 mm
|
| | PLUG LENGTH (mm) | HOLE DIAMETER (mm) | INSULATION THICKNESS (mm) | QUANTITY
PACK | PRODUCT CODE | | 90 | 8 | 30-40 | 250 | KI-090/8 | | 110 | 8 | 50-60 | 250 | KI-110/8 | | 130 | 8 | 70-80 | 250 | KI-130/8 | | 150 | 8 | 90-100 | 250 | KI-150/8 | | 170 | 8 | 110-120 | 250 | KI-170/8 | | 170 | 8 | 130-140 | 250 | KI-190/8 | |
Installation | |
|
INSULATION SUPPORT - KIK TYPE ONE PIECE WITH NO PIN | |
TYPICAL APPLICATIONS
For fixings light insulation boards,
not exposed to influence of suction wind
forces e.g. by insulation of: building
substructure, basement walls,
window and door reveals,
building plinths.
| |
MATERIAL
Plug sleeve: impact resistant co-polymer of polypropylene PP
| |
INSTALLATION TIPS
- Pre-drilling diameter: 8 mm
- Anchorage depth: min. 30 mm
|
| | PLUG DESCRIPTION | HOLE DIAMETER (mm) | INSULATION
THICKNESS (mm) | QUANTITY
PACK | PRODUCT CODE | | 35 x 70 | 8 | 10-20 | 400 | KIK-070 | | 35 x 90 | 8 | 30-40 | 400 | KIK-090 | |
Installation | |
|
METAL FIRE RESISTANT INSULATION SUPPORT - MKI TYPE | |
TYPICAL APPLICATIONS
For fixing mineral wool to facade
walls in all applications where
fire-resistance is required.
| |
MATERIAL
Electro-zinc coated steel
or stainless steel A2 - to order.
| |
INSTALLATION TIPS
- Pre-drilling diameter: 8 mm
- Anchorage depth: min. 50 mm
|
| | PLUG LENGTH (mm) | HOLE DIAMETER (mm) | QUANTITY
PACK | PRODUCT CODE | | 90 | 8 | 250 | MKI-090/8 | | 110 | 8 | 250 | MKI-110/8 | | 140 | 8 | 250 | MKI-140/8 | | 170 | 8 | 250 | MKI-170/8 | | 200 | 8 | 250 | MKI-200/8 | |
Installation | |
|
INSULATION FLANGE WITH COVER CAP - KC TYPE | |
TYPICAL APPLICATIONS
For fixing both light polystyrene and
heavy mineral wool boards - in combination
with appropriate screws
- to facade walls made from: timber,
sheet metal, plasterboard, etc.
| |
MATERIAL
Impact resistant co-polymer
of polypropylene PP
or polyamide PA 6.0 (Nylon)
- to order.
| |
APPROVALS
TECHNICAL APPROVAL: ITB no. AT - 15 - 4627/2005
INSTALLATION TIPS
- Pre-drilling diameter: 10 mm
- Anchorage depth: min. 50 mm
|
| | FLANGE DIAMETER (mm) | QUANTITY
PACK | PRODUCT CODE | | 60 | 200 | KC | |
Installation | |
|
| | | | | | | | |
